Difference between revisions of "SEP sesam Storage Hardware Support Matrix"
|Line 185:||Line 185:|
| Cloud || Any kind of cloud provider is supported as long as they provide an '''S3''' interface (e.g. AWS
| Cloud || Any kind of cloud provider is supported as long as they provide an '''S3''' interface (e.g. AWS). An S3 target can be used with SEP sesam as a cloud replication target and requires the usage of SEP Si3 deduplication technology. Find more details here [[:|Cloud Replication Configuration]].
Revision as of 11:37, 20 February 2019
Copyright © SEP AG 1999-2021. All rights reserved.
Any form of reproduction of the contents or parts of this manual is allowed only with the express written permission from SEP AG. When compiling and designing user documentation SEP AG uses great diligence and attempts to deliver accurate and correct information. However, SEP AG cannot issue a guarantee for the contents of this manual.
SEP sesam generally supports all devices which are connected via standard interfaces like FC, iSCSI, SAS, SATA, SCSI and S3. The device connection must be supported by the hardware vendor and recognized correctly by the operating system.
- Single tape drives
- Tape Libraries
- Storage Systems
- Cloud Storage
SEP sesam can use a wide range of devices. We receive regular reports from our customers that also other tape or storage devices work smoothlessly that are not explicitly listed in our device matrix. Customers should be at the latest OS update level, device driver and firmware levels. In case of any hardware problems with listed and not listed devices, please contact the hardware vendor first.
The list of supported hardware vendors and devices on this page is just a selection of our most valuable partners and makes no claim for completeness! If you have specific requests or questions regarding supported devices please contact us via email to email@example.com.
For more compatibility information have a look at the SEP sesam OS and Database Support Matrix.
|DELL/EMC||DataDomain V6.0 and higher with DDBoostFS|
|FUJITSU||ETERNUS LT Series|
|FUJITSU||ETERNUS CS8000 (vjuke only)|
|FUJITSU||ETERNUS DX Series|
|FUJITSU||ETERNUS AF Series|
|HPE||HPE 3PAR StoreServ|
|HPE||HPE StoreOnce VSA|
|HPE||HPE StoreOnce Catalyst (coming soon)|
|IBM||IBM TS Series|
Hardware encryption for LTO 8 is not supported for SEP sesam v. 220.127.116.11, however, it is possible to use the LTO encryption by installing the current service pack which contains the required slu binary, available at
For details, see LTO Encryption.
|Cloud||Any kind of cloud provider is supported as long as they provide an S3 interface (e.g. AWS). An S3 target can be used with SEP sesam as a cloud replication target and requires the usage of SEP Si3 deduplication technology. Find more details here Cloud Replication Configuration.|
NoteAs SEP sesam uses a generic S3 interface this could also be used for an SDS appliance (e.g. SES).
|VTL||Will be configured in SEP sesam as a real library. Find more details here Loader Configuration.|
|RDX||Will be configured in SEP sesam as a diskbased VTL. Find more details here RDX Configuration.|
|DLT||Can be configured in SEP sesam via drive type. Find more details here Drive Configuration.|
Software Defined Storage
|SUSE||SUSE Enterprise Storage (SES)|
|Thomas Krenn||Thomas-Krenn SES Appliance|
|Red Hat||Red Hat Ceph Storage|