SEP sesam Storage Hardware Support Matrix: Difference between revisions

From SEPsesam
Line 104: Line 104:
| HPE || HPE StoreOnce VSA
| HPE || HPE StoreOnce VSA
|-
|-
| HPE || HPE StoreOnce Catalyst (coming soon)
| HPE || HPE StoreOnce Catalyst
|-
|-



Revision as of 15:17, 10 September 2019

Template:Copyright SEP AG en

Overview

SEP sesam generally supports all devices which are connected via standard interfaces like FC, iSCSI, SAS, SATA, SCSI and S3. The device connection must be supported by the hardware vendor and recognized correctly by the operating system.

Such as:

  • Single tape drives
  • Tape Libraries
  • VTL
  • Storage Systems
  • NAS
  • Cloud Storage
Note

SEP sesam can use a wide range of devices. We receive regular reports from our customers that also other tape or storage devices work smoothlessly that are not explicitly listed in our device matrix. Customers should be at the latest OS update level, device driver and firmware levels. In case of any hardware problems with listed and not listed devices, please contact the hardware vendor first.

The list of supported hardware vendors and devices on this page is just a selection of our most valuable partners and makes no claim for completeness! If you have specific requests or questions regarding supported devices please contact us via email to support@sep.de.

For more compatibility information have a look at the SEP sesam OS and Database Support Matrix.

Technology Partners

DELL/EMC

DELL/EMC PowerVault Series
DELL/EMC ML Series
DELL/EMC DataDomain
DELL/EMC DataDomain V6.0 and higher with DDBoostFS
DELL/EMC VNX

FUJITSU

FUJITSU Fujitsu Scalar
FUJITSU ETERNUS LT Series
FUJITSU ETERNUS CS800
FUJITSU ETERNUS CS8000 (vjuke only)
FUJITSU ETERNUS DX Series
FUJITSU ETERNUS AF Series
FUJITSU ETERNUS CD10000
FUJITSU ETERNUS JX

HPE

HPE HPE 3PAR StoreServ
HPE HPE MSA
HPE HPE StoreEver
HPE HPE StoreOnce
HPE HPE StoreOnce VSA
HPE HPE StoreOnce Catalyst

IBM

IBM IBM TS Series

NetApp

NetApp FAS Series
NetApp AFF Series

QUANTUM

QUANTUM Scalar
QUANTUM DXi

SAYTEC

SAYTEC sayFUSE

Media Technology

LTO

LTO LTO1
LTO LTO2
LTO LTO3
LTO LTO4
LTO LTO5
LTO LTO6
LTO LTO7
LTO LTO8 Note
Note

Hardware encryption for LTO 8 is supported since SEP sesam version 4.4.3.64 with service pack 2019-1 installed.

Cloud Storage

S3 Any kind of cloud provider is supported as long as it provides a standard S3 (Simple Storage Service) interface (e.g. AWS). An S3 target can be used with SEP sesam as a cloud replication target and requires the usage of SEP Si3 deduplication technology. Find more details here Cloud Replication Configuration.
Note
As SEP sesam uses a generic S3 interface this could also be used for an SDS appliance (e.g. SES).

VTL

VTL Will be configured in SEP sesam as a real library. Find more details here Loader Configuration.

RDX

RDX Will be configured in SEP sesam as a diskbased VTL. Find more details here RDX Configuration.

DLT

DLT Can be configured in SEP sesam via drive type. Find more details here Drive Configuration.

Software Defined Storage

SUSE

SUSE SUSE Enterprise Storage (SES)

Thomas Krenn

Thomas Krenn Thomas-Krenn SES Appliance

Red Hat

Red Hat Red Hat Ceph Storage

Archive of Supported Devices

Archive of Supported Devices