Archive:How to configure RDX Drives: Difference between revisions
Line 85: | Line 85: | ||
Auto unload: yes | Auto unload: yes | ||
As shown in this screenshot: | |||
[[Image:rdx_3.jpg]] | [[Image:rdx_3.jpg]] |
Revision as of 15:41, 7 July 2011
Introduction
Prerequisites
- SEP Sesam Server Version >= 4.0.2.13
Configuration
Creating a new Drive Group
It's recommended to create new Drive-Group to which RDX Drive will be added. To do this go to Components->Drives and create a new drive group called "RDX" with the "New Group" Button:
Linux
Device configuration
Before you can configure the RDX Drive on Linux, you have to check
which device Name is used for the RDX Drive. If you attach the RDX Drive
to the Linux-System, most distributions will automatically mount it
in e.g. /media
If this is not the case, please check via the "dmesg" command
which device is used for the RDX Drive (usually /dev/sdXX
)
It is absolutely necessary that each time you change the RDX drive it is detected with the same Device Name - this can be done with a so-called UDEV rule.
It is also recommended to format the inserted "RDX Tapes" with a common Linux File System (ext3/reiserfs/xfs)
Adding a new drive on Linux Systems
The drive on Linux systems is added with the following options:
Drive : As shown in this screenshot:
Options:
Path for removable media: device name of your RDX Drive (See device configuration) Device Path: mount point where the media will be mounted Auto Unload: yes Mount Command: mount Umount command: umount Eject command: eject
After adding the drive, continue with the general steps.
Windows
Adding a new drive on Windows Systems
After the Drive-Group has been created, continue with adding a new Drive to the group. Do this by choosing the Drive Group and hitting the "New Drive" Button. The Drive should have the following settings:
Drive:
Driver Number: will be automatically assigned Drive Name: will be automatically assigned Loader: No Loader Drive Type: DISK_CHNG Device Server: your backup server or the system the drive is attached to Drive Group: RDX
Options:
Path for removable media: the drive specifier of your RDX drive is detected if you attach it to the system (M: in this example). Please make sure you have the rights to write files in this location and that the drive name is fully accessible. Eject command: sm_eject_media <Path for removable_media> Auto unload: yes
As shown in this screenshot:
General Steps for both Windows and Linux
Creating a new Media Pool
After successfully creating a drive, switch to "Components -> Media pools" and create a new Media-Pool like shown in this screenshot:
(Maybe Optional) Create a new Media Type
Please check in "Configuration -> Media Types" whether if a Media Type DISK-RESERVE_1GB exists, like shown in this screenshot:
If not, please create it with the following options:
Add Media to Mediapool
After these steps have been done, it is now time for adding your first RDX Media to the Mediapool. In "Components-> Media pools" choose the created Media-Pool "RDX-Pool" and hit the "New Media" Button.
Add the RDX Drive currently inserted with the Following options:
Repeat this step for all your RDX changeable Medias you have!
Troubleshooting
Adding Media Fails
If being unable to add media, please check the "Day Protocol" of the Sesam Server for possible errors.