Archive:Benutzer Handbuch 4.0 - Druckversion

From SEPsesam

Nutzungsrechte

(siehe auch AGB)

Copyright 2011 SEP AG. Alle Rechte vorbehalten

Mit dem Kauf oder dem Erwerb einer Lizenz für SEP-Produkte erhält der Kunde nicht das Recht, SEP-Produkte, -Protokolle oder -Systemarchitekturen mit einem anderen Produkt zu kombinieren oder zu verbinden, sofern hierdurch ein Patent oder eine Patentanmeldung von SEP verletzt wird.

Eine von SEP gewährte Softwarelizenz ist persönlich und nur mit ausdrücklicher vorheriger Zustimmung von SEP übertragbar und berechtigt nicht zur Gewährung von Unterlizenzen.

Die Software darf nur insoweit kopiert, vervielfältigt oder über ein Computernetzwerk auf ein anderes System übermittelt werden, als dies für den Betrieb auf der lizenzierten Anlage und zur Archivierungs- und Sicherungszwecken erforderlich ist. Ausnahmsweise darf der Kunde vorübergehend die Software auf einer anderen Zentraleinheit oder Systemkonfiguration betreiben, wenn der Betrieb der Software auf der lizenzierten Anlage infolge eines Gerätedefekts unmöglich ist.

Der Kunde wird auf allen vollständigen oder teilweisen Kopien, Adaptionen oder Übermittlungen der Software den SEP-Copyright-Vermerk und alle sonstigen Hinweise auf gewerbliche Schutzrechte von SEP in gleicher Weise anbringen, wie sie auf der Originalversion der lizenzierten Software enthalten sind.

Der Kunde wird sämtliche Informationen über die Software, die verwendeten Methoden und Verfahren vertraulich behandeln. Der Kunde darf keine Verfahren irgendwelcher Art anwenden, um aus der Binärsoftware Quellprogramme oder Teile davon wiederherzustellen oder um Kenntnisse über Konzeption oder Erstellung der Software bzw. von Hardware- oder Firmware-Implementierungen der Software zu erlangen.

Eine von SEP erteilte Softwarelizenz berechtigt ausschließlich zur Nutzung der jeweils lizenzierten Version. Quellcodes, die von SEP zur Lizenzierung freigegeben sind, können dem Kunden nur aufgrund eines gesondert abzuschließenden Quellcode-Software-Lizenzvertrages zur Verfügung gestellt werden oder wenn es freie SEP sesam Software ist unter den GPL-Bedingungen zur Verfügung gestellt werden.


Hinweis

Dieses Benutzer-Handbuch beschreibt alle SEP sesam Funktionen. Der Funktionsumfang kann jedoch durch Ihren Lizenzvertrag eingeschränkt sein. Für die Freischaltung weiterer Funktionen wenden Sie sich bitte an Ihren Reseller oder Distributor oder direkt an die SEP AG info@sep.de.


Einleitung

Willkommen bei SEP sesam

SEP sesam | Backup - Restore - Disaster Recovery

Die SEP sesam Datensicherungs-Lösung wurde speziell für Client-/Server-Architekturen entwickelt. Von einem Datenserver bis zu großen heterogenen Datenverarbeitungszentren mit großen Datenbanken und skalierbaren Storage-Area-Netzwerke (SAN) reicht der Einsatzbereich der Software. Perfekt einsetzbar ist SEP sesam somit in allen Unternehmensgrößen und Branchen.

Um in kleinen Zeitfenstern große Datenbestände sichern zu können, bietet SEP sesam Multiplex Backup. Dies minimiert die Zeit für geplante und ungeplante Datensicherungsaufgaben erheblich.

Sicherungen während des Betriebs sind mit SEP sesam Datenbank und Groupware Online Modulen möglich. Durch die SEP sesam Online Sicherungs- und Rücksicherungsmodule für alle gängigen Datenbanken und Groupwarelösungen lassen sich hochverfügbare Datensicherungsumgebungen leicht realisieren. Auch für die Rücksicherung einzelner gelöschter Emails bietet SEP sesam eine sehr attraktive Lösung

Der geringe Bedarf an Rechenleistungen und die hohen Übertragungsraten werden über die patentierten SEP sesam Algorithmen sichergestellt. Durch die Verwendung der plattformunabhängigen SEP sesam Benutzeroberoberfläche kann die Datensicherung und Rücksicherung überall im Netzwerk, auch über WAN, erfolgen.

SEP sesam unterstützt alle Standard Datensicherungsgeräte wie Bandlaufwerke, Lader und Virtuelle Tape Libraries. Virtuelle Tape Libraries emulieren die Lader Funktionalität auf Festplatten. Mit den günstigen und leistungsfähigen Festplatten kann die SEP sesam Virtual Tape Library die Performance und Flexibilität der Datensicherung und -Rücksicherung nachhaltig steigern. Die SEP sesam Disk-to-Disk-to-Tape (D2D2T) Funktion ermöglicht eine weitergehende Archivierung von besonders kritischen Daten bei maximaler Sicherungs- und Rücksicherungs-Performance.

Produktübersicht

Um die Konfiguration des Systems einfach und effektiv zu gestalten, wurde ein Ansatz gewählt, der sich um folgende 6 Grundkomponenten aufbaut:

Laufwerk
Speichergerät lokal oder remote
Lader
Roboter lädt Medien von/aus Laufwerk
Medium
Träger der gesicherten Daten
Client
Rechner, von welchem Daten gesichert werden
Auftrag
Beschreibung der Sicherung oder Rücksicherung
Termin
Ausführungszeitpunkt diverser Aktionen

Weitere Merkmale:

  • Datensicherungs-Server auf Linux (auch OES), Windows, freeBSD und Unix
  • Client für Linux, Windows, zahlreiche UNIX Derivate, NetWare (Client-freie Unterstützung) und VMS einsetzbar
  • schnelle und einfache Installation mit Testsicherung und Testrestore
  • Oberfläche in JAVA programmiert mit Master GUI Funktionen
  • alle Typen von Laderobotern verwendbar
  • volle, differenzielle, inkrementelle und copy (für Auslagerung) Sicherungen
  • Zeitsteuerung über benutzerkonfigurierbare Termine
  • Medienverwaltung und Gestaltung flexibelster Medienstrategien via Terminsteuerung
  • benutzerkonfigurierbare Schnittstellen (Alarm, Pre/Post, Desaster und Notify)
  • schnelle Restaurierung von Daten durch effektive Verwaltung der Sicherungssätze und Implementierung übersichtlicher Suchalgorithmen
  • volle und selektive Restaurierung an die Originalpfade oder in neu erzeugte Verzeichnisse mit oder ohne Erhaltung der originalen Pfadstruktur
  • Terminsteuerung kann auch für beliebige externe Anwendungen benutzt werden.
  • zur Sicherung von zahlreichen Datenbanken stehen zertifizierte Online-Schnittstellen zur Verfügung.
  • optimierte Speichergerätenutzung durch paralleles Sichern mehrerer Clients/Quellen; Sesam Multiplex Streaming
  • optionale Anwahl schneller Datenpfade durch das Netz.
  • Migration von Savesets; DISK to DISK to TAPE Konzeption


Prinzip von SEP sesam

Einleitend wird hier das SEP sesam Prinzip des Zusammenspiels der einzelnen Komponenten einer Datensicherung gezeigt. Nach der Installation des Sesam Servers ist zunächst die Basiseinrichtung vorzunehmen. Das bedeutet, am Anfang allen Schaffens gilt es das Einrichten der Sicherungshardware, die Konfiguration der Laufwerksgruppen sowie Laufwerke und das Initialisieren der Medienpools mit den dazu gehörenden physikalischen und/oder virtuellen Medien zu bewältigen.


Sesam-Philosophie.png


Um eine Sicherung automatisch zu starten, benötigt man einen Auftrag, in dem definiert ist, welche Dateien von welchem Client gesichert werden sollen. Weiterhin ein Medium (über einen Medienpool), dass sich in einem Laufwerk (über eine Laufwerksgruppe) befindet und zuletzt einen Termin, an dem die Sicherung stattfinden soll.

Diese Grundkomponenten müssen in der Konfigurationsphase erzeugt und mit Werten versorgt werden. Das Menüsystem des SEP sesam unterstützt den Anwender bei der Erstellung der Sicherungsaufträge sowie den Zeitplänen mit den dazu gehörenden Sicherungsterminen. Die oben stehende Grafik zeigt das Zusammenspiel. Die roten Pfeile ab dem Medienpool nach rechts zeigen die direkte Verknüpfung des Medienpools zu einer Laufwerksgruppe. Dieser Laufwerksgruppe sind danach 1-N Laufwerke zugeordnet. Danach können die Sicherungsmedien (Bänder, virtuelle Diskmedien, Wechselmedien usw.) in den entsprechenden Medienpool aufgenommen werden. Über einen Medienpool wird somit definiert WOHIN gesichert wird. Die Datenquelle ist direkt mit einem Sicherungsauftrag verbunden. In ihm wird beschrieben WAS gesichert werden soll. Das Zwischenglied, welches beide Seiten verbindet, ist der Zeitplan. Am Zeitplan wird verankert WANN etwas gesichert wird. An diesen Zeitplan wird dann der Sicherungstermin gehängt, in dem der zu sichernde Auftrag gewählt und festgelegt wird WIE (z.B. Full, Diff, Inc) und WOHIN (Medienpool) die Sicherung erfolgen soll.

Nach der Installation und der Basiskonfiguration kann mit der Einrichtung von Sicherungen fortgefahren werden. Dabei wird folgende Reihenfolge empfohlen:

  1. Aufnahme der Clients
  2. Anlegen von Aufträgen (WAS soll gesichert werden)
  3. Anlegen von Zeitplänen (WANN soll gesichert werden)
  4. Verbinden des Zeitplans mit einem Sicherungstermin (WAS wird WIE und WOHIN soll gesichert werden)


Anordnung der SEP sesam Objekte 4.0

Medienstrategie 4.0

Der SEPuler - ein Terminkalender 4.0

Die Sicherung 4.0

Die Rücksicherung 4.0

Duplizierung von Sicherungssätzen und Migration 4.0

Aufbewahrungsfrist, Medienzyklus 4.0

Grundkonfiguration

Der nun folgende Absatz beschreibt schrittweise, wie die oben eingeführten Sesam Komponenten konfiguriert werden, um eine erste einfache Datensicherung durchzuführen. Eine detaillierte Beschreibung der Oberflächenelemente findet man im Kapitel Sesam Oberfläche.

Schritt 1 Standort 4.0

Schritt 2 Clients 4.0

Schritt 3 Speicherhardware - Laufwerke und Lader 4.0

Schritt 4 Medien 4.0

Schritt 5 Aufträge - was soll gesichert werden? 4.0

Schritt 6 Zeitpläne 4.0

Schritt 7 Start einer Sicherung 4.0

Verzeichnisstruktur der SEP sesam-Software

Eine genaue Beschreibung der verschiedenen Sesam Verzeichnisse befindet sich im Administrationshandbuch.

Die SEP sesam Oberfläche 4.0


Menüleiste und Toolbar

Menueleiste.jpg


In der Menüleiste befinden sich die Menüs Datei, Aktivitäten, Konfiguration und Hilfe. Darunter befindet sich eine Schaltleiste (Toolbar) für den Schnellzugriff mit folgenden häufig verwendeten Bedienungselementen:

zusätzlich können dynamisch weitere Knöpfe eingeblendet werden, z.B.

  • zyklische Anzeige-Updates für "Job Status" Arbeitsfenster (z.B. "Job Status->Sicherungen").


Datei 4.0

Aktivitäten 4.0

Konfiguration 4.0

Fenster 4.0

Hilfe 4.0

Komponenten

Komponenten 3.8.jpg


Topologie 4.0

The SEP sesam data store is a device type used for writing savesets directly to one or several configured storage locations – into the file system. SEP sesam uses a data store instead of a conventional media pool to define the storage repository. Data is still primarily backed up to a media pool, however, a data store is used underneath to save data to dynamically managed data areas, including disk backups.

SEP sesam can contain multiple data stores of different types and sizes, depending on the type of data being backed up, the backup technique, and the storage location (a local disk, a virtualized storage device, storage appliances, etc.). The following data store types are supported:

  • Path: The default data store type, relevant to the configuration of most storage locations, unless one of the following data store types is required, e.g., for deduplication or backup to cloud storage.
  • SEP Si3 deduplication store: Used for target-based (Si3T) and source-based deduplication (Si3S), replication, backup directly to S3 cloud storage (Si3 NG store) and S3 cloud replication (Si3 store).
    Information sign.png Note
    As of SEP sesam v. Jaglion, two Si3 deduplication store types are available. The common name for both types is Si3 deduplication store, unless it is explicitly stated that the information refers exclusively to Si3 V1 (first generation) or Si3 (next generation). SEP sesam recommends using the new generation Si3 when creating a new data store. Si3 is advantageous over regular Si3 V1 as it offers better performance, scaling, and resource savings. It allows you to back up your data directly to S3 cloud storage and restore the items you want directly from there.
  • NetApp Snap Store: Used for NetApp snapshots backup.
  • HPE StoreOnce: Used for integration with the HPE StoreOnce Catalyst storage system.
  • HPE Cloud Bank Store: Used for replication of data to HPE Cloud Bank Storage.

Data store overview Apollon.jpg

Data store status icons

The data store status icons consist of three parts:

  • The top bar shows the clone status of the S3 store.
  • The middle bar shows the sanity state of the Si3 store.
  • The bottom bar shows the data store status.
Icon Description
Data store state error.png The data store state has errors.
Data store state ok.png The data store state is OK (good).
Si3 states ok.png The data store and Si3 state are OK (good).
Si3 S3 state ok sanity state ok clone state error.png The Si3 and the sanity state are OK, but the S3 clone state shows an error.
Si3 state error sanitystate ok.png The Si3 store state shows an error, but its sanity state is OK.
Si3 state.png Shows the Si3 status under the Si3 State tab.

View Mode button

SEP sesam provides an additional View Mode button that enables you to switch between the table view and the tree view with grouped objects.

  • Tree view: SEP sesam default view shows the status of individual data stores grouped together in a hierarchical view.
  • Table view: A simple flat view that shows the status of individual data stores one after another.

SEP sesam data store concept

SEP sesam data stores can be of different types depending on the type of data being backed up, backup technique, and used storage. The default and most commonly used data store type is Path. The following information applies generally to a data store, unless explicitly specified otherwise; data store types other than Path may have slightly different characteristics. For details, see the relevant articles: SEP Si3 deduplication store, NetApp Snap Store, HPE StoreOnce, and HPE Cloud Bank Storage.

The difference between a conventional media pool, typically used for backing up directly to tapes, and a data store is in defining the storage space directory directly in the drive by using the operating system's partition functions. Therefore the data store space is managed at the partition level. You configure a data store by specifying its capacity and (optionally) setting the high watermark (HWM) value. This is the upper value for the used disk space on the data store. Take into account that exceeding HWM and filling up the data store may cause backup issues. You should consider this when specifying the data store capacity. For details, see Data store calculation recommendations below.

Information sign.png Note
Only one data store should be used for each hard disk partition. While it is possible to set up multiple data stores on a single partition, it is not recommended due to potential conflicts. Each data store reads the values of other partitions when checking partition allocation, which can create conflicts and obstruct their coexistence.

Additionally, storing third-party data on the data store storage often leads to issues, as SEP sesam may not have the storage capacity guaranteed in the specification. This can cause backup operations to abort.

As shown in the illustration below, a media pool still refers to a drive group. The drive group points to exactly one data store between the media pool and the drives. The connection between the data store and the related drive is static.

Data store principle graphic Beefalo.png

Data store capacity

Data store configuration consists of specifying the data store capacity and HWM. The data store capacity is space reserved for the SEP sesam data store and, optionally, non-SEP sesam data that might be stored on the same volume as the SEP sesam data store. If the data store is shared with non-SEP sesam data, you have to obtain a special SEP sesam storage license.

Information sign.png Note
The Si3 deduplication store has specific hardware and sizing requirements. For more information, see Si3 Deduplication Hardware Requirements and Configuring Si3 Deduplication Store.

When specifying the capacity value, a dedicated partition must have enough free space. The method for calculating the required disk space is:
space occupied by SEP sesam + free disk space = DS capacity

where DS capacity is the configured capacity value in SEP sesam's data store configuration. For examples on calculating a data store capacity, see How do I calculate the data store capacity.

More than one data store is required in a media pool only if the media pool uses data from several disk partitions, in which case all the drives of a media pool's data stores must be part of the same drive group. This ensures that the SEP sesam queue manager distributes the backups in this media pool to all data stores (balancing). For details on drive groups, see Drives.

HWM, purge and Si3 repair area

A high watermark is a general parameter that specifies the upper value for the used disk space on the data store. When this value is reached, the status of a data store changes from OK to Warning, but backups continue to be performed.

The Si3 repair area parameter is relevant only for SEP Si3 deduplication store. It specifies reserved space for unused Si3 files, as explained below.

  • High watermark (HWM): A parameter for managing disk space usage; it defines the upper value for the used disk space on the data store. This parameter can be specified manually for the Path, Si3 and NetApp Snap store, and is set automatically during the creation of a SEP Si3 Deduplication store.
    When this value is reached, the status of a data store changes to Warning. It serves as an indication for the administrator that the data store is running out of space, but does not prevent backups to be started. A data store purge process is running automatically for all (EOL-free) savesets. The oldest free savesets are deleted first. Purge is done until all EOL-free savesets are deleted. For more details on EOL, see Automatic Retention (EOL) Management.
  • Events that trigger the data store purge are:
    • NEWDAY
    • Sharing the data store drive after a backup
    • Starting purge manually in GUI
    The manual execution of the data store purge process deletes the obsolete (EOL-free) savesets. Another option for releasing the data store space is to clean up a data store by deleting orphaned savesets, as described in the following section.
  • Si3 Repair Area: A parameter used by SEP Si3 Deduplication Store for managing disk space dedicated to Si3 files that were identified by a garbage collection job and are no longer used. These files are still kept in the repair area to enable possible repair of Si3 if there are any structural problems (may be caused by a file system error or by a crash of an operating system). The files in the repair area are removed automatically after the specified amount of time (SEP sesam default: 4 days) or when the disk usage threshold is reached. If the value is set to 0, the Si3 repair functionality is turned off.
  • Information sign.png Note
    The Si3 repair area is available only in advanced UI mode (formerly expert GUI mode). To see the Si3 repair area field, make sure your UI mode is set to advanced. For details, see Selecting UI mode.

Clean up orphaned savesets

You can manually remove orphaned savesets from the data stores by using the Clean up option in the Data Stores content pane, thus releasing the space that might be occupied by orphaned savesets. This is useful in cases when a data store seems to be inaccessible, its storage space is occupied, or SEP sesam space check shows non-sesam data.

Steps

  1. In the Main Selection -> Components, click Data stores to display the data store contents frame.
  2. In the content pane menu, click Clean up and select the data store (and the relevant drive number) for which you want to free up space by removing orphaned savesets.
    Click Clean Up.
    Data store clean up Apollon.jpg
  3. You can check the status of the clean-up action in the data store properties under the Actions tab.

Data store calculation recommendations

  • Data store volume sizing and capacity usage should be managed at the partition level. It is recommended that only SEP sesam data is stored on the respective volume.
  • The data store should be at least three times (3x) the maximum full backup size of the planned backup to allow the watermarks to work automatically and dynamically.
  • It may be necessary to scale up the data store to beyond 3x the maximum size when a longer hold-back time is stipulated or very big savesets are to be stored.
Information sign.png Note
The Si3 deduplication store has specific hardware and sizing requirements. For more information, see Si3 Deduplication Hardware Requirements and Configuring Si3 Deduplication Store.

Limitations

  • When a media pool requires more than one data store, all data stores must be connected to the same SEP sesam Device Server (IP host). SEP sesam does not currently support network-distributed data stores being served by a single media pool.
  • When using more than one data store, only negative OR positive values can be used for specifying the capacity and HWM. SEP sesam does not support the use of negative and positive values at the same time. For more details on data store capacity and values, see FAQ: How do I calculate the data store capacity.

Data store properties

Double-clicking the data store displays all its details, e.g., the name of the data store, the store type, the message about the last executed action, the last action performed, its capacity, etc.

The buttons in the lower left corner allow you to create and delete drive, create new media pool, and delete a data store.

Data store properties Apollon.jpg

  • Capacity: The size (in GiB) of the partition available for the backups. For examples on calculating a data store capacity, see How do I calculate the data store capacity.
  • High watermark: The upper value (in GiB) for the used disk space on the data store. When this value is reached, the status of a data store changes from OK to Warning, but backups continue to be performed.
  • Filled: The size (in GiB/TiB) of the occupied data store space by SEP sesam.
  • Used: Total used space (in GiB/TiB) on the partition (incl. SEP sesam external data).
  • Total: Maximum available space (in GiB/TiB) on the partition as reported by the operating system.
  • Free: Available disk space (in GiB/TiB) for SEP sesam.

You can modify existing drive options and set additional by double-clicking the drive. In the Drive Properties window, you can select a different drive group, browse the path for the data store, etc. Under Access mode, you can also set the following permissions for the data store drive:

  • read/write (default): Allows to perform the read operations (e.g., restore or using a drive as the source of a migration) and write operations (e.g., backup or using a drive as the target of a migration). As the write operations can occupy the drive for a while, consider using certain drives only for write operations and setting up the other drive(s) with read operations only.
  • read: Only read operations, such as restore or as a source of a migration, are allowed. It is recommended to set up additional drives in read mode to allow uninterrupted processing of tasks, such as restore.
  • write: Only write operations, such as backup or as the target of a migration, are allowed. The use of drives in write mode is recommended if these drives are used in combination with additional drives that are only used in read mode.

The first drive in the list has an additional OS Access (previously Account) tab where you can specify the credentials (user name and password) required to access the configured drive path.
Drive properties Apollon.jpg

Savesets tab

Selecting a data store and clicking the tab Savesets opens a list of all savesets with their details. You can change the EOL of the individual saveset, adjust the backup-related EOL, and lock or unlock the individual saveset. Note that in SEP sesam ≤ 4.4.3 Beefalo V2, the backup locked status is only applied to the selected backup, so you need to manually lock all backups in a backup chain as well as migrated and replicated backups. With v. 5.0.0 Jaglion, the locked status is automatically applied to all savesets of a backup (backup chain, migrated and replicated savesets). You can also lock your backups in SEP sesam Web UI.

SEP Tip.png Tip
The circles next to the EOL (Backup/Saveset) indicate the status of your saveset (gray circle – EOL has expired, blue circle – saveset is protected; EOL has not yet been reached). For details, see SEP sesam Icons Legend.

Data store savesets Apollon.jpg

  • Saveset EOL: The column Saveset EOL enables you to change EOL for each individual saveset, stored on the respective data store. You can extend or reduce its retention time. If the adjusted saveset is a part of a backup chain, the whole chain is affected as described below in EOL-related backup chain dependencies.
  • Saveset state: The column Saveset State shows the status of a saveset (for example, Successful, Warning, Error). In case of a failed migration or some kind of data store corruption, a saveset may be incomplete or corrupted. Such savesets cannot be used for restore.
  • Backup EOL: The column Backup EOL enables you to adjust EOL for all savesets containing the same data. This backup-related EOL is applied to all savesets with the same data, including migrated and replicated savesets.
    For example, adjusting EOL of a migrated saveset from 2.12.2017 to 12.12.2018 results in changed EOL for all related backup data, i.e., original backup, replicated backup, as well as for all backups in a backup chain, if a saveset with adjusted EOL is a part of it.
  • SEP Tip.png Tip
    SEP sesam keeps the failed backup according to the media pool retention time together with the last successful backup or migration saveset. This is the default backup retention behavior and can be changed by modifying retention-related keys, as described in Customize the default retention behavior for backups and migration. These keys may not be supported in previous versions, where failed backups were deleted automatically after 3 days.
  • EOL-related backup chain dependencies: You can extend or reduce the retention period for an individual saveset or backup-related saveset, as described above. Keep in mind that increasing EOL of a DIFF or INCR saveset will result in increased EOL of all dependent backups (FULL and other DIFF and INCR) to preserve the backup data. This keeps the backup chain readily available for restore. On the other hand, decreasing the EOL of a DIFF or INCR saveset leads to reduced EOL of all dependent savesets. If the EOL is changed to a date in the past, the savesets will be deleted during the next purge. How SEP sesam manages EOL depends on the version. For more details, see Automatic Retention (EOL) Management.
Information sign.png Note
Any saveset can be deleted if the following conditions are met:
  1. Its EOL has expired.
  2. Typically, there must be no other savesets that depend on this saveset. You can override this condition by explicitly allowing the EOL for the whole backup chain to be set to expired, thus deleting backup data on all related savesets.

Media tab

The Media tab provides an overview of the configured media pools and media.

Data store media Apollon.jpg

Actions tab

The Actions tab provides an overview of the media-related events. It displays the media status, the action type, its start/stop time, duration and message.

Data store actions Apollon.jpg

Si3 State, HPE Catalyst Store State and HPE Cloud Bank Store State

The Si3 State tab is shown for Si3 data stores, HPE Catalyst Store State tab is shown for HPE Catalyst stores and HPE Cloud Bank Store State is shown for HPE Cloud Bank stores. The tabs display the last deduplication message, the status of active tasks, encryption status, number of stored objects, data size before/after deduplication, dedup ratio, saved storage space, etc. You can also review the Si3 deduplication, HPE Catalyst store or HPE Cloud Bank store status in the media actions properties.

Data store state Apollon.jpg


Lader 4.0

Laufwerke 4.0

Medienpools 4.0

Medien 4.0

Aufträge

Unter Aufträge sind die verschiedenen Datensicherungsaufträge wie Backup, Rücksicherung und Migration zusammengefasst. Zur Verwaltung werden drei verschiedene Sichten angeboten: nach Clients, nach Gruppen und Sicherungspläne (Baumstruktur auf der linken Seite).

Auftraege 38de.jpg


Aufträge nach Clients 4.0

Aufträge nach Gruppen 4.0

Sicherungspläne 4.0

Migrationsaufträge 4.0

Zeitplanung

Im Kapitel SEPuler ist ausgeführt, wie die Zeitsteuerung des Sesam arbeitet. Hier werden die Oberflächenelemente zu Zeitplänen, Terminen und Kalender beschrieben.


Zeitplanung.jpg


Zeitpläne 4.0

Termine 4.0

Kalenderblatt 4.0

Job Status

Jobstatus de 3.8.jpg


Sicherungen sind ein Teil des Sesam-Informationssystems. Hier werden die abgelaufenen Sicherungen dargestellt, wobei zahlreiche Auswahl- und Filtermöglichkeiten angeboten werden.

Sicherungen nach Status 4.0

Rücksicherungen nach Status 4.0

Migrationen nach Status 4.0

Medienaktionen nach Status 4.0

Monitoring

Unter Monitoring werden die aktuell laufenden Prozesse/Daemons und die aktuellen Stati aller Laufwerke angezeigt.


Monitoring 3.8.jpg


Letzter Backup Status 4.0

Prozesse 4.0

Monitoring Laufwerke 4.0

Protokolle

Protokolle.jpg


SEP sesam erzeugt je Sicherungstag zwei Protokolle, das Status- und das Tagesprotokoll. Diese Informationen sind im Gegensatz zu den obigen Anzeigen der Sicherungen, die aus der Sesam Datenbank stammen, als Datei unter <SESAM>/var/prot abgelegt und können vom Anwender bei Bedarf für weitere Verarbeitungen benutzt werden (Druck, Email).


Achtung: Ein Sicherungstag wird von 2 Tageswechsel-Terminen begrenzt.

Die Auswahl der Zeitspanne ermöglicht eine Eingrenzung der Ausgabe und wird mit dem Schalter Anzeigen gestartet.


Status 4.0

Tagesprotokoll 4.0

Anhang

Verschiedene Beispiele für die Angabe von Exclude Patterns bei Sesam Sicherungsaufträgen

Exclude mit Regulären Ausdrücken 4.0

Exclude mit File Patterns 4.0