4 4 3 Beefalo:Step 3: Storage Hardware - Drives and Loaders

From SEPsesam
Revision as of 16:39, 6 February 2020 by Sta (talk | contribs) (Beefalo-related update.)
Other languages:
<<<Back
Step 2: Clients
User Manual
Next>>>
Step 4: Media - Data Carriers

Step 3: Storage Hardware - Drives and Loaders

During SEP sesam Server installation, SEP sesam checks the SCSI API of the operating system for connected storage devices and puts accessible device files (SCSI address) into the SEP sesam database. This auto-detection works for most devices, but for certain types of loaders the connection between loader and drives cannot be recognized automatically. You have to manually verify and configure such devices. You also have to manually configure any backup device that is connected after SEP sesam installation. For details, see Configuring Loaders and Drives.

SEP sesam displays automatically detected backup devices in GUI: Main selection -> Components -> Loaders. All detected loaders are displayed; you only need to select a loader to review its properties, and then click OK to confirm the loader configuration. It is highly recommended to set the Auto unload function to No.

Information sign.png Note
On Windows, the hardware must be recognized correctly by the operating system in the Windows Device Manager (must not be shown as Unknown Medium Changer) before SEP sesam is installed! For details, see Checking hardware configuration on Windows.

Loader Beefalo V2.jpg

For the drives, an analog procedure is applied. You can view the properties of each drive in the Main selection -> Components -> Drives -> Drive groups/Drives.

Drives Beefalo V2.jpg

If the drive characteristics in the field Loader states No loader but should be serviced by an autoloader, the drive was not recognized/configured properly. You can re-configure the drives, as described in Creating or re-configuring drives.

Information sign.png Note
The first drive in the loader is drive 0. If there are more drives in the loader, they will be numbered sequentially.

See also

Configuring Loaders and Drives


Copyright © SEP AG 1999-2024. All rights reserved.

Any form of reproduction of the contents or parts of this manual is allowed only with the express written permission from SEP AG. When compiling and designing user documentation SEP AG uses great diligence and attempts to deliver accurate and correct information. However, SEP AG cannot issue a guarantee for the contents of this manual.