4 4 3 Beefalo:RHV Rücksicherung

From SEPsesam
Revision as of 12:50, 1 October 2020 by Sta (talk | contribs) (Created page with "800px|link=")
Other languages:

Copyright © SEP AG 1999-2024. Alle Rechte vorbehalten.

Jede Form der Reproduktion der Inhalte dieses Benutzerhandbuches, ganz oder in Teilen, ist nur mit der ausdrücklichen schriftlichen Erlaubnis der SEP AG gestattet. Bei der Erstellung dieses Benutzerhandbuches wurde mit größtmöglicher Sorgfalt gearbeitet, um korrekte und fehlerfreie Informationen bereit stellen zu können. Trotzdem kann die SEP AG keine Gewähr für die Richtigkeit der Inhalte dieses Benutzerhandbuches übernehmen.

Draft.png WORK IN PROGRESS
This article is in the initial stage and may be updated, replaced or deleted at any time. It is inappropriate to use this document as reference material as it is a work in progress and should be treated as such.
Docs latest icon.png Willkommen in der aktuellsten Version der SEP sesam Dokumentation 4.4.3 Beefalo/Beefalo V2. Frühere Versionen der Dokumentation finden Sie hier: RHV Archiv.


Übersicht

SEP sesam backup solution for RHV* environments was developed together with Red Hat. SEP sesam uses RHV Manager backup (libvirt) API to perform snapshot-based backups of virtual machines (VMs) in RHV environments and enables consistent, agentless backup and restore of all RHV VMs.

As of v. 4.4.3 Beefalo, the RHV module also provides support for oVirt-based platforms within Oracle Linux Virtualization Manager (OLVM) in the same way as for RHV environments. Since the RHV module now supports OLVM the same GUI options and steps apply for restoring OLVM VM, with the only difference that the relevant OLVM objects should be selected instead of RHV.

The restore of RHV/OLVM VMs is very similar to regular file system restore. There are two ways to restore your RHV virtual machines (VMs) in SEP sesam: by using GUI restore wizard (described below) or through the web interface Restore Assistant (only RHV VMs). Even though most of the options are the same in both restore interfaces, the web Restore Assistant interface is designed to be more intuitive and offers additional advanced options. However, it cannot be used for scheduling restore or single file restore as these are only supported in the GUI mode. For details, see Restore Assistant.

In der GUI wird die Rücksicherung über die Menüleiste -> Aktivitäten -> Rücksicherung ausgelöst. Der Rücksicherungsassistent (Restore Wizard) führt Sie durch den Prozess der Rücksicherung Ihrer Daten. Beachten Sie, dass Sie nur eine VM gleichzeitig rücksichern können. Eine Schritt-für-Schritt-Anleitung finden Sie unter Standard Rücksicherungsverfahren.

*RHV ist ein Rebranding von Red Hat Enterprise Virtualization (RHEV).

Rücksicherungsoptionen

  • Rücksichern einer VM auf den Original oder einen anderen Speicherort mit dem gleichen oder einem neuen VM-Namen unter Verwendung einer Relokation.
  • You can restore your VM to the same or a different single RHV server or RHV cluster.
  • You can perform a simple path restore of the selected RHV VM configuration directly to a directory on any system instead of restoring and importing VM to the RHV environment.
  • In SEP sesam ≥ 4.4.3 Beefalo V2, you can perform a single file restore by mounting RHV/OLVM virtual disk.

Restore workflow

The restore process uses the following workflow:

  1. The VM configuration is restored to the SEP sesam data mover VM.
  2. The target VM is created from this.
  3. The disks on the target VM are created and attached to the SEP sesam data mover VM.
  4. The data is then restored.
  5. The disks are detached from the data mover VM and attached to the target VM.

Vorraussetzungen

Um einen fehlerfreien Betrieb von SEP sesam zu gewährleisten und die Leistung zu verbessern, müssen die folgenden Bedingungen erfüllt sein:

  • Check the RHV support matrix for the list of supported RHV versions and OLVM support matrix for supported OLVM versions.
  • Stellen Sie sicher, dass Ihre RHV/OLVM Umgebung richtig konfiguriert ist, wie in RHV Konfiguration beschrieben.
  • Stellen Sie sicher, dass auf dem Zielsystem, auf dem Sie Ihre Daten wiederherstellen, ausreichend Platz vorhanden ist.
Information sign.png Anmerkung
During restore, the virtual disk will consume complete thick provisioned space on the target storage. For example, if you have backed up 1 TB VM disk, 1 TB must be free on the target pool where the VM is created.

Restoring RHV virtual machines

Create a new restore task for the RHEV Manager or OLVM client. You can only restore one VM at a time.

  1. Wählen Sie in der SEP sesam GUI Menüleiste Aktivitäten -> Rücksicherung. Das Fenster Neuer Rücksicherungsauftrag erscheint.
  2. Wählen Sie aus was Sie rücksichern möchten. Sie können in den Sicherungssätzen nach Auftragsnamen oder nach Dateiname oder Pfad suchen.
    • Wenn Sie nach Auftragsname suchen, benutzen Sie die Dropdown-Liste der verfügbaren Aufträge und selektieren Sie denjenigen, den Sie rücksichern möchten. Diese Option ist als Standard vorgewählt.
    • Wenn Sie nach Dateinamen/Pfad suchen, wählen Sie die Option Dateiname oder Pfad im Sicherungssatz und geben Sie ihren Suchausdruck im Suchmusterfeld ein.
  3. Unter den Gesichert im Zeitraum Dropdown-Listen müssen die Zeiträume spezifiziert werden, für welche die Suche erfolgen soll. Klicken Sie Weiter.
  4. RHV rst task-filter de.jpg
  5. Select the RHV/OLVM saveset you want to restore. Click Next.
  6. RHV rst task-task de.jpg
  7. Überprüfen Sie die Konfiguration Ihres Rücksicherungsauftrags und legen Sie ggf. zusätzliche Optionen fest.
  8. Die Details des ausgewählten Sicherungssatzes werden oben und unten (Optionale Auswahl der Datenquelle) im Fenster angezeigt. Der Name des Rücksicherungsauftrags wird automatisch im Feld Rücksicherungsauftrag erzeugt. Sie können den Namen bearbeiten und unten einen Kommentar einfügen.
    Zieldaten
    Sie können die RHV/OLVM-VM auf der Original-VM rücksichern (wenn der Zielknoten derselbe Server ist, von dem die Daten gesichert wurden, d.h. wenn Quell- und Zielserver gleich sind) oder unter einem neuen VM-Namen. Wenn Sie die VM unter einem anderen Namen rücksichern möchten, wählen Sie die Option Rücksicherung mit neuem VM Namen und geben Sie einen neuen VM-Namen ein oder verwenden Sie die Schaltfläche Browser.
    Zielknoten
    Zeigt den Zielserver an, auf dem die Daten wiederhergestellt werden sollen. Unter dem Menüpunkt Ändern der VM Zielauswahl können Sie einen Auftrag aus einem Cluster auf einem anderen Standalone-Server wiederherstellen, indem Sie den entsprechenden RHV-Zielknoten und Datenspeicher Pfad auswählen. Wenn kein Zielpfad definiert ist, wird die VM am Standardstandort des RHV-Servers oder -Clusters wiederhergestellt.
    VM-Rücksicherungsoptionen
    Select one of the following from the drop-down list:
    • Existierende Elemente nicht überschreiben (Standardeinstellung): Die VM wird nicht rückgesichert, wenn sie bereits auf dem Zielserver existiert.
    • Existierende Elemente überschreiben: Falls eine VM bereits auf dem Zielserver existiert, wir sie durch die zurückgespielte Version ersetzt.
    • Neue Version anlegen wird Dateien unter einem neuen Namen rücksichern.
    • Sie können auch auswählen, ob Ihre virtuelle Maschine nach der Rücksicherung automatisch gestartet werden soll, indem Sie Virtuelle Maschine nach der Rücksicherung starten/Virtuelle Maschine nach der Rücksicherung nicht starten (standardmäßig ausgewählt) wählen.

    RHV rst task-target de.jpg

  9. Optionally, if you want to restore only the actual size of the VMs, you can use the dd utility to create a thin-provisioned (sparse) disk file: Click the Expert Options button and enter the following under Restore options: -a use_dd
  10. Information sign.png Anmerkung
    As of v. 4.4.3. Beefalo, the Expert Options button for specifying advanced restore options is only available in the Expert UI mode. It is not available for users that run the GUI in Basic or Advanced mode. In the latter case, if you want to access the Expert Options you first have to change the Basic/Advanced UI mode to Expert, as described in Selecting UI mode.

    RHV rst task-expert options.jpg

  11. In the final step of the restore wizard, you can review all the settings of your restore task. You can also edit the settings by using Change Selection button. If you want to start your restore immediately, click Start. If you want to save the restore task, click Save.

A restore task can be scheduled like any other task. If you want to add a restore task to the schedule, see Scheduling Restore.

Restoring single files

With 4.4.3 Beefalo V2, SEP sesam introduces single file restore – item-level restore of files, folders, and volumes from the COPY backup of RHV/OLVM virtual machine by mounting a virtual disk on the device server and browsing the content of a virtual disk file.

SEP Tip.png Hinweis
If you prefer to watch a video rather than to read a step-by-step guide, you can learn all the steps of the restore procedure by watching Backup and restore of RHV/OLVM on SEP sesam YouTube channel.

Before starting a restore, check the supported file systems and restrictions.

Mounting RHV/OLVM virtual disk

Create a new restore task for individual item(s) you want to restore.

  1. From the SEP sesam GUI menu bar, select Activities -> Restore. The New Restore Task window opens.
  2. Select what you want to restore. You can search savesets by task name or by filename or path.
    • When searching by task name, use the drop-down list of available tasks and select the one you want to restore from. This option is selected by default.
    • If you are searching by filename/path, select the option Filename or path in a saveset and enter your search expression in the search pattern field.
  3. Under the Saved in period drop-down lists, specify the time frame for which you want to conduct the search. Click Next.
  4. The search results are displayed. From the list of savesets matching your query, select the version from which you want to restore an individual file. Then select the check box Mount virtual disk(s). You can mount any saveset stored to default data store Path, Si3 deduplication store or HPE StoreOnce. Mounting is not possible if the savesets are stored to tapes or if the data is compressed or encrypted. Note that some other restrictions apply.
  5. RHV SFR select task Beefalo V2.jpg
  6. Mount is triggered and your virtual disk is mounted to the device server. This may take a few seconds. Click OK.
  7. RHV SFR mount Beefalo V2.jpg
  8. In the Select Files window, select the folders or files you want to restore, for example, the home directory, and click Next.
  9. RHV SFR select files Beefalo V2.jpg
  10. In the fourth step of the restore wizard (Target Settings), select a restore target where you want to restore your files.
  11. In the final step of the restore wizard, you can review all the settings of your restore task. You can start your single file restore immediately by clicking Start. If you want to save the restore task, click Save.
  12. Click OK to unmount the saveset and close your restore session.
Information sign.png Anmerkung
A restore task can be scheduled like any other task. If you want to add a restore task to the schedule, see Scheduling Restore.

Monitoring restore

You can view the status of your restore jobs by selecting Job State -> Restores from the Main Selection. Restore overview provides detailed information on the last run of restore jobs, including the task name, status (successful, error, in queue ...), start and stop time of the last backup, data size, throughput, client and message.

As of 4.4.3 Beefalo V2, you can also monitor the restore progress using the Web UI. For details, see SEP sesam Web UI.

Bekannte Themen

Im Falle von Problemen mit RHV bitte hier schauen: RHV Troubleshooting.

Siehe auch

Standard RücksicherungsverfahrenRücksicherungsassistentRHV KonfigurationRHV Sicherung