4 4 3 Beefalo:Migrationsaufträge

From SEPsesam
Revision as of 10:42, 10 September 2019 by Sta (talk | contribs) (Created page with "''Laufwerk''''':")
Other languages:
<<<Zurück
Sicherungspläne
Benutzer Handbuch
Weiter>>>
Replikationsaufträge


Draft.png WORK IN PROGRESS
This article is in the initial stage and may be updated, replaced or deleted at any time. It is inappropriate to use this document as reference material as it is a work in progress and should be treated as such.


Migrationsaufträge

Migration ist der Prozess des Kopierens gesicherter Daten von einem Medienpool auf einen anderen, z.B. von einer Disk auf ein Band. Gesicherte Dateien werden als Sicherungssätze organisiert, die von der Quelle in den Zielmedienpool kopiert werden, typischerweise in einer Disk-to-Disk-to-Tape (D2D2T)-Sequenz.

Dies ermöglicht das Duplizieren von Sicherungssätzen. Um die Migrationsperformance zu optimieren, können für die Migration nur erfolgreich gesicherte Sicherungssätze oder Sicherungssätze mit Warnungen (Status erfolgreich oder mit Warnungen) ausgewählt werden, während fehlerhafte Sicherungssätze oder teilweise wiederhergestellte Sicherungssätze (die Daten aus abgebrochenen Sicherungen enthalten) nicht migriert werden.

Sofern die Medien im Quell- und Zielmedienpool nach der Migration verfügbar sind, ist der Sicherungssatz dupliziert; ein Sicherungssatz gilt jedoch als migriert, wenn er aus dem Quell-Medienpool gelöscht wird. Sowohl auf Quell- als auch auf Zieldatensätze kann mit dem Rücksicherungsassistenten zugegriffen werden. Wenn nur der migrierte Sicherungssatz existiert, wird er im Falle einer Rücksicherung benötigt.

Migration tasks Beefalo.jpg

Migrationsaufträge werden unter Hauptauswahl -> Aufträge -> Migrationsaufträge verwaltet. Quell- und Zielmedienpool müssen in einem neuen Migrationsdialog definiert werden. Zusätzlich stehen eine Anzahl von Filteroptionen zur Verfügung (einschließlich nach Auftrag, Auftragsgruppe oder Sicherungsclient). Sie können auch Sicherungen von einem bestimmten Medium in einen anderen Pool migrieren.

Sie können den Migrationsauftrag sofort aus der GUI heraus starten oder ihn an einen geplanten Migrationstermin anhängen, so dass er zu einem vordefinierten Zeitraum automatisch startet. Details finden Sie unter Konfigurieren der Migration.

New migration task Beefalo.jpg

When configuring a migration task, you can set the following options:

  • Name: Enter a meaningful for the migration task, e.g., MIG_Si3_mly_to_mig_3mly (max. 50 characters).
  • Medienpool: Angabe des Quellmedienpools.
    • Pool: Select the source media pool from which the data will be migrated, e.g., source_mediapool (mandatory field).
    • Laufwerk: Drive number of the drive that will be used to read the data. By selecting the source media pool the drive number is set automatically, however, you can select another drive from the drop-down list (mandatory field).
    • Schnittstelle: Geben Sie optional die Netzwerkschnittstelle des Servers an, über den die Datenübertragung erfolgen soll, z.B. den Namen des Remote Device Servers (RDS).
  • Ziel: Angabe des Ziels für die Migration.
    • Pool: Select the target media pool to which the data will be migrated, e.g., target_mediapool (mandatory field).
    • Laufwerk: Optionally, select the drive number of the drive that will be used to write the data. Typically, you use this if you have configured additional drives and you want to assign dedicated drives for migration jobs. For details, see the option Create second drive in Configuring a Data Store.
    • Interface: Optionally, specify the network interface of the server through which the data transfer will be executed, e.g., the name of the Remote Device Server (RDS).
  • Backup date: The time frame of the backups that will be migrated is defined.
    • To define the time frame of the backups that will be migrated, you can specify it either according to dates – Date or select the option Relative backup date. With values entered in the from/to fields of the Relative backup date you define the number of days in the past that are considered for data migration, meaning all data in the source media pool that was backed up within a given period of time is going to be migrated to the target pool. For example, to migrate all data from the past week including the current Sesam day, the Relative backup date is set to -7 while to is set to 0. Or, to migrate all data from the last 10 days, specify the relative time frame from -10 to 0.
    • In the drop-down list Based on, the Sesam days option is selected by default. Sesam day is a backup day you define according to your backup routines. For example, your backups can run after midnight but retain the backup date of the prior day. Sesam day/backup day is defined by time set in the NEWDAY event. For details, see SEPuler: SEP sesam backup day.
  • Backup State: Select the backup completion status of the savesets you want to migrate: Successfully or with warnings (default), Only successful or partially restorable (containing data from cancelled backups).
    • Copy migrated savesets again: If selected, a saveset that has already been migrated can be migrated again.
    • Delete after successful migration: If selected, a saveset will be deleted after successful migration.
  • Backup level: Select the backup level you want to migrate (COPY, FULL, DIFF, INC): C F D I G, where G means a special backup level generation. The G backup level enables you to migrate a complete backup cycle in one step thus providing everything you need for disaster recovery. For example, the combination of selected backup levels I and G within the specified time frame -1 to 0 in the Relative backup date would migrate all incremental backups from yesterday up to today as well as all dependent incremental and differential backups of the respective backup chain including the last associated full backup. This ensures that in need of disaster recovery all required backups are available on the storage media.
  • Number of copies: Select how many times may the backed up data be migrated. Default is 0, meaning that data migration is unlimited.
  • Object: Select one of the following objects as a migration source.
    • Task: If you select a particular backup task as a source, only this task within the defined time frame is migrated.
    • Task group: If you select a task group as a source, only the tasks of this task group within the defined time frame are migrated.
    • Client: If you select a particular client, only the backups for this client within the defined time frame are migrated.
  • Special filter:
    • Start media: Standard is "*" for all media. Optionally, you can select only one medium from the source media pool to be migrated. You should pay special attention in order not to break a backup chain that might span across more media. If you select to migrate solely one medium, then only the backups that are stored on this medium are migrated regardless whether they belong to a wider backup set or not.
    • Saveset: Standard is "*" for all savesets. Optionally, you can select only one saveset to be migrated according to its ID.
    • Paralell migration: Select (default) or deselect the check box Parallel migration. If selected, data can be migrated concurrently using multiple streams, thus improving the migration speed.
  • Note: Optionally, add additional information about the migration.

After you have configured your migration task, click Save or Cancel.

Siehe auch

Konfiguration einer Migration


Copyright © SEP AG 1999-2024. Alle Rechte vorbehalten.

Jede Form der Reproduktion der Inhalte dieses Benutzerhandbuches, ganz oder in Teilen, ist nur mit der ausdrücklichen schriftlichen Erlaubnis der SEP AG gestattet. Bei der Erstellung dieses Benutzerhandbuches wurde mit größtmöglicher Sorgfalt gearbeitet, um korrekte und fehlerfreie Informationen bereit stellen zu können. Trotzdem kann die SEP AG keine Gewähr für die Richtigkeit der Inhalte dieses Benutzerhandbuches übernehmen.