Restore from tape via SBC without a valid SEP sesam database
Copyright © SEP AG 1999-2021. All rights reserved.
Any form of reproduction of the contents or parts of this manual is allowed only with the express written permission from SEP AG. When compiling and designing user documentation SEP AG uses great diligence and attempts to deliver accurate and correct information. However, SEP AG cannot issue a guarantee for the contents of this manual.
|WORK IN PROGRESS|
|This page is a draft. Treat the information on this page with caution as it may be incomplete.|
- Operating system with working tape drive or loader device.
- Installed SEP sesam Server (identical version to the preceding system): Install the same SEP sesam Server package that was installed on the old system and set up the new server system in the same way as the previous one. For details on installation, see SEP sesam Quick Install Guide.
- A medium that contains correctly saved SESAM_BACKUP (containing <SESAM_VAR> and <SESAM_ROOT>/bin/sesam directories). For details, see Configuring SESAM_BACKUP.
The restore of the SEP sesam Server described below is a two-step procedure consisting of determining the required saveset information and restoring via sbc.
Listing the savesets on the tape via sm_sms_interface
Use the sm_sms_interface command to access the SMS Server and identify the available savesets on tape.
- Insert the tape with the SESAM_BACKUP backup savesets and identify the savesets on the tape device by using the command:
sm_sms_interface dir -d <tape_device>
|On Windows, replace the tape device identifier (/dev/nst0) with the corresponding Windows device (Tape0).|
Obtain the required information from the output as shown in the example below:
- The first number in the highlighted line is the segment number; in our example: 4.
- The SavesetName is SEP sesam unique identification assigned to a saveset; in our example: SC20090610105624.
- The Tapelabel in the header displays the <tape_name>; in our example: cefix00001.
- The TapeID in the header displays the <tape_id>; in our example: (1)
Restoring from tape via sbc
sbc -r -l FULL -C <control_host>:11001 -S <storage_host>:11001 -d SMS:<tape_device> -t <tape_name>:<tape_id> -s <saveset_id> -n <segment_number> -R / -o overwrite
- <control_host> is the name of the SEP sesam Server.
- <storage_host> is the SEP sesam Server or Remote Device Server (RDS) with the attached medium.