Archive:SESAM restore with sbc from diskmedia

From SEPsesam
Jump to: navigation, search
Icon archived docs.png THE CONTENT OF THIS PAGE IS OUTDATED
SEP AG has discontinued support for obsolete SEP sesam versions. Instructions are still available for these SEP sesam products, however, SEP AG accepts no responsibility or liability for any errors or inaccuracies in the instructions or for the incorrect operation of obsolete SEP sesam software. It is strongly recommended that you update your SEP sesam software to the latest version. For the latest version of SEP sesam documentation, see documentation home.


Copyright © SEP AG 1999-2018. All rights reserved.

Any form of reproduction of the contents or parts of this manual is allowed only with the express written permission from SEP AG. When compiling and designing user documentation SEP AG uses great diligence and attempts to deliver accurate and correct information. However, SEP AG cannot issue a guarantee for the contents of this manual.

Goal

Restore of a SESAM server without sm_recover only using sbc directly from still existing virtual disk images.

This example recreates the following situation: a SEP sesam server with a 1 GB media pool backup (location /backup) which contains 9 virtual disk media. The SESAM_BACKUP and other backups are located on these disk media.

A disaster occured and only the disk media are existant. Now the state of the SEP sesam server before the disaster is to be restored from these media.

Course of Action

1) Making sure the disk media are availible in the directory /backup/
2) Installation of a SEP sesam server with identical version of the original system
3) Creating an identical media pool (name: backup)
4) Archive adjustment of the media pool with automatic initialization (no overwriting!!)
5) Loading the disk medium with the last SESAM_BACKUP to the drive
6) Searching the last SESAM_BACKUP to disk medium
7) Restore via sbc.


Adding the old Media

Backup.jpg

Creating the media pool:

Backup2.jpg

Archive adjustment:

Backup3.jpg

After successful initialization:

Backup4.jpg

Loading the Media to the Virtual Loader

Loading the first disk medium with the virtual loader (loader action):

Loader.jpg

Restore of the SESAM_BACKUP via sbc

Displaying the existant savesets on the virtual disk medium via sm_sms_interface:

Restore1.jpg


important information here:
1) Segment Number (3)
2) SaveSet Name (SC20090615095925)
3) Tape Label (BACKUP00001) 
4) Tape ID (1)
Restore is executed with the sbc command which contains following information: 

sbc -r -l FULL -C <client_host>:11001 -S <server_host>:11001 -d SMS:<tape_device> -t <tape_name>:<tape_id> -s <saveset_id> -n <segmentnumber> -R / -o overwrite

Restore2.jpg

After this the SEP sesam server is back to its old state!

See also

SBC CLI